In 2023, my attempts to harvest honey from my flow hive supers and my full flow hive was a disaster. The problem was the honey didn’t flow toward the back because the hive was too level. After you’ve fractured the honey frames by turning your long, metal, key tool, gravity will cause the honey to simply – and disastrously – pool in the bottom of the hive, rather than flow along the tube to the back where you can collect it. This can cause your bees to drown, which I think happened to me last year. It took a year to fully resuscitate all my hives and is why I didn’t make any more attempts in 2023 to collect any honey.

The two flow hive honey supers that were on top of traditional 10-frame brood boxes couldn’t easily be lifted in the front to allow the honey to flow out the back. When I tried to lift them up a little in the front, the bees in the brood box were very upset and let me know! They streamed out and made collecting the honey very difficult.

My full flow hive (upper and lower boxes) was supposed to be easily adjustable to lift the front. Even with the little level visible in the window, the screws on the legs were too hard to turn under the weight of the flow hive to tilt the front upward to allow flow toward the back.

Here is an image shared by another flow hive owner showing his honey pooling disaster. My hands were too full managing the problem to take photos myself, but this is the problem I wanted to solve in 2024. And did! Hurray!!

I bought two (they come as a set of 2) inexpensive “arm lift jacks” on Amazon. Here is what the two jacks look like as I used them to slightly lift the front of my flow hive.

Thanks to these jacks, it couldn’t have been easier – or more successful – to lift the front of the entire hive, not disturbing the bees, and let the honey flow to the back where I collected it. You can also see one of the backs visible at the front of the hive, from the side, toward the end of my video showing the honey flowing nicely out the back.